Roland monoFab SRM-20 Desktop Milling Machine

$1,100.00
Product Code: monoFab SRM-20 Desktop Milling Machine
Availability: In Stock

The Roland monoFab SRM-20 Desktop Milling Machine is brand new,authentic,original,sealed in box with all accessories including 2-years warranty.

 

Specification:

MODEL SRM-20
Cuttable Material Modeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
X, Y, and Z Operation Strokes 8 (X) x 6 (Y) x 2.38 (Z) inches,
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
Workpiece table size 9.14 (X) x 6.17 (Y) inches,
232.2 (X) x 156.6 (Y) mm
Distance From Collet Tip to Table Maximum, 5.15 in 
(130.75mm)
Loadable Workpiece Weight 4.4 lbs (2kg)
X-, Y-, and Z-Axis Drive System Stepping motor
Operating Speed 0.24 – 70.87inch/min,
6 – 1800mm/min
Software Resolution 0.000039 inches/step (RML-1), 0.000039 inches/step (NC code), 
0.01 mm/step (RML-1), 0.001mm/step (NC code)
Mechanical Resolution 0.0000393 inches/step,
0.000998594 mm/step
Spindle Motor DC motor Type 380
Spindle Rotation Speed Adjustable 3,000 – 7,000 rpm
Cutting Tool Chuck Collet method
Interface USB
Control Command Sets RML-1, NC code
Power Requirements Machine: DC24V, 2.5A, 
Dedicated AC adapter: AC 100-240V ±10%, 50/60Hz
Power Consumption Approx. 50W
Operating Noise During operation: 65 dB (A) or less (when not cutting),
during standby: 45 dB (A) or less
External Dimensions 17.76 (W) x 16.80 (D) x 16.78 (H) inches,
451.0 (W) x 426.6 (D) x 426.2 (H) mm
Weight 43.2 lbs, 19.6 kg
Installation Environment Temperature of 41 to 104 °F (5 to 40°C), 
35 to 80% relative humidity (no condensation)
Included Items USB cable, AC adapter, Power cord, Cutting tool, Collet, Set
screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal
wrench (size 2,3 mm / 0.059, 0.12 inches), Positioning pins,
Double-sided tape, Start-up page guidance card

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: