Roland MODELA MDX-50 Benchtop Milling Machine

$2,630.00
Product Code: MODELA MDX-50 Benchtop Milling Machine
Availability: In Stock

The Roland MODELA MDX-50 Benchtop Milling Machine is brand new,authentic,original,sealed in box with all accessories including 2-years warranty.

 

Specification:

 

MODEL   MDX-50
Acceptable materials* Resins such as chemical wood and modeling wax (metal not supported)
Operating range X: 400mm (15.80in) 
Y: 305mm (12.00in) 
Z: 135mm (5.315in)
Table size W: 400mm (15.80in) 
D: 305mm (12.00in) 
Loadable workpiece size

X: 400mm (15.80in) 
Y: 305mm (12.00in) 
Z: 100mm (3.90in)

Axis drive Stepper Motor
Feed rate XY: 7 to 3600mm/min (0.3in to 141.7 in/min) 
Z: 7 to 3000 mm/min (0.3 to 118.1 in/min)
Software resolution RML-1: 0.001 mm/step NC code: 0.001 mm/step
Mechanical resolution 0.01 mm/step 
(0.39 mil/step; half step)
Spindle motor Brushless DC motor
Spindle rotation speed 4500 ~ 15000 rpm
Tool chuck Collet
Tool Change Method AutomaticTool Changer (ATC)
ATC Magazine Capacity  
5 Tools + 1 Detection pin (6 Position Capacity)
Tool Shank Diameter 6.35, 3.175mm
(0.250in, 0.125in)
Operating noise During operation
Dust box dimmensions   600 x 700 x 95mm 
(23.62 x 27.65 x 3.74in)
Interface USB
Power requirements (VAC/A) AC 100 to 240 V ±10%, 50/60 Hz, 1.2 A
(Overvoltage Category: II, IEC 60664-1)
Power consumption (W) ≈ 95W
Acoustic noise level (dB) No-load operation: 60 dB (A) or less 
Standby: 45 dB (A) or less
External Dimensions Width X Depth x Height: 29.92 × 35.43 × 28.82 in (760 × 900 × 732 mm )
Weight 122kg (269lb)
Installation environment Indoor use at altitudes Up to 2000 m (6500ft)
Temperature 5 to 40°C (41 to 104°F)
Humidity 35 to 80%RH (no condensation)
Ambient pollution degree 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage 1440 V
Long-term temporary overvoltage 490 V
Included items  Power cord, USB cable, manual, Roland DG Software Package CD, detection 
pin, hexagonal screwdriver, hexagonal wrench, wrench, tool holder, tool 
positioner, Z0 sensor

 
MODEL   MDX-50
Acceptable materials* Resins such as chemical wood and modeling wax (metal not supported)
Operating range X: 400mm (15.80in) 
Y: 305mm (12.00in) 
Z: 135mm (5.315in)
Table size W: 400mm (15.80in) 
D: 305mm (12.00in) 
Loadable workpiece size

X: 400mm (15.80in) 
Y: 305mm (12.00in) 
Z: 100mm (3.90in)

Axis drive Stepper Motor
Feed rate XY: 7 to 3600mm/min (0.3in to 141.7 in/min) 
Z: 7 to 3000 mm/min (0.3 to 118.1 in/min)
Software resolution RML-1: 0.001 mm/step NC code: 0.001 mm/step
Mechanical resolution 0.01 mm/step 
(0.39 mil/step; half step)
Spindle motor Brushless DC motor
Spindle rotation speed 4500 ~ 15000 rpm
Tool chuck Collet
Tool Change Method AutomaticTool Changer (ATC)
ATC Magazine Capacity  
5 Tools + 1 Detection pin (6 Position Capacity)
Tool Shank Diameter 6.35, 3.175mm
(0.250in, 0.125in)
Operating noise During operation
Dust box dimmensions   600 x 700 x 95mm 
(23.62 x 27.65 x 3.74in)
Interface USB
Power requirements (VAC/A) AC 100 to 240 V ±10%, 50/60 Hz, 1.2 A
(Overvoltage Category: II, IEC 60664-1)
Power consumption (W) ≈ 95W
Acoustic noise level (dB) No-load operation: 60 dB (A) or less 
Standby: 45 dB (A) or less
External Dimensions Width X Depth x Height: 29.92 × 35.43 × 28.82 in (760 × 900 × 732 mm )
Weight 122kg (269lb)
Installation environment Indoor use at altitudes Up to 2000 m (6500ft)
Temperature 5 to 40°C (41 to 104°F)
Humidity 35 to 80%RH (no condensation)
Ambient pollution degree 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage 1440 V
Long-term temporary overvoltage 490 V
Included items  Power cord, USB cable, manual, Roland DG Software Package CD, detection 
pin, hexagonal screwdriver, hexagonal wrench, wrench, tool holder, tool 
positioner, Z0 sensor
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: