Roland Modela MDX-40A Benchtop Milling Machine

Product Code: Modela MDX-40A Benchtop Milling Machine
Availability: In Stock

The Roland Modela MDX-40A Benchtop Milling Machine is brand new,authentic,original,sealed in box with all accessories including 2-years warranty.




Acceptable materials  Resins such as chemical wood and modeling wax (metal not supported)
X, Y, and Z strokes 305 (X) x 305 (Y) x 105 (Z) mm
(12 (X) x 12 (Y) x 4-1/8 (Z) in.)
Distance from spindle tip to table Maximum 123 mm (4-13/16 in.)
Table size 305 (W) x 305 (D) mm
(12 (W) x 12 (D) in.)
Loadable workpiece weight 4 kg (8.8 lb)
XYZ-axis motor Stepping motor
Feed rate XY-axis: 0.1 to 50 mm/sec. (0.0039 to 1.9 in./s), 
Z-axis: 0.1 to 30 mm/sec. (0.0039 to 1.1 in./s)
Software resolution NC-code: 0.001mm/step (0.000039 in./step),
RML-1: 0.01 mm/step (0.00039 in./step)(RML-1)
Mechanical resolution 0.002 mm/step (0.00008 in./step)(Micro-step)
Spindle motor Brushless DC motor, Maximum 100 W
Spindle rotation 4500 to 15000 rpm
Tool chuck Collet
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Power supply Voltage and frequency  AC100 to 240 +/-10%, 50/60 Hz
Required power capacity 2.1 A
Power consumption Approx. 210W
Acoustic noise level No-load operation: 56 dB (A) or less, Standby: 42 dB (A) or less
Dimensions 669 (W) x 760 (D) x 554 (H) mm
26-3/8 (W) x 29-15/16 (D) x 21-13/16 (H) in.
Weight 65 kg (143.3 lb)
Operation temperature 5 to 40°C (41 to 104°F )
Operation humidity  35 to 80% (no condensation)
Included items  Power cord, power plug adapter, USB cable, collet, Z0 sensor, hexagonal wrench, hexagonal screw drivers, spanners, Roland

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: